Medical
Products
MBK's broad based association and partnership with 3M Medical, Avery Medical, Tyco Medical, Medco and many more, allow us to be knowledgeable
and competitive with the appropriate adhesive, film, paper or foam for
your application whether it is for Ostomy, Wound care, Tube Management, Orthopedic or any other.
MBK offers in line Die Cutting, Sheeting, Laminating, Island Placement, Folding,
Slitting and Printing in a Class 100,000 Clean Room, adhering to your
every qualification and specification, as an FDA Registered company. Below
you will find some of the standard products offered by MBK.
Double Coated Medical Tapes
- Double coated films and foams in varying thickness coated with a medical grade adhesive.
- Common uses are for prosthesis attachments, ostomy and incontinence devices, wound care, grounding
pads, hair pieces, surgical drapes and many more applications where adhesion is required for long
or short periods of time.
|
 |
Medical Adhesive Transfer Tapes
- Thin film adhesive transfer from .8 mil to 5 mil thickness, allowing greater conformability and coated
with medical grade acrylic or rubber adhesives.
- Common uses include ostomy and incontinence devices, drug delivery, wound care, prosthesis attachments,
draping, medical device fabrication, and other applications requiring skin contact.
|
|
Medical Urethanes, Vinyl and PE Film Tapes
- Medical film or rubber from .8 mil thickness, coated with a medical grade adhesive.
- Conformabable, microporous/permeable
- Provide a fluid barrier, heat sealable
- Gamma and
EtO sterilizable, and printable
- Used for electrodes, wound care, IV attachment, allergy patch testing, hyperalimentation patches,
ostomy and incontinence devices.
|
|
Medical Single Coated Foam Products
- Comformable Medical Polyethylene, PVC foams coated with
medical grade acrylic adhesive.
- These products are occlusive, Gamma and EtO sterilizable, printable, heat sealable.
- Used for ostomy and continence devices, allergy, patch testing, prosthesis attachments, cushioning, drape
fenestrations, urelogical applications, electromedical devices, and also as a platform for medical device
fabrication.
|
|
Medical Single Coated Paper, Non Woven and Woven Products
- Non-occlusive, conformable with low stretch, breathable and coated with a medical grade acrylic
or rubber adhesive.
- Products are used for line attachments, surgical gowns, prosthesis attachments, drapes/drape fenestrations,
and for medical device fabrication.
- Available in white or tan in various thickness and ounce weights.
|
|
Specialty Film
- Medical optically clear, distortion free, anti fog coated film in 1 mil and up.
- Used in all areas of medical applications and production.
|
|
Specialty Absorbent Adhesives and Hydrocolloids
- Medical grade gels and adhesives
- Single or double coated
- Can be combined with other substrates
- Featuring high absorbency, will not support bacterial growth and will not break down upon saturation
- Product is used for ostomy, wound care and drug delivery..
|
|
Medical Bioanalytical and Diagnostic Tape
- Various films and foils and other substrates
- Can be pressure sensitive
- For applications in the diagnostic industry
|
|
Print This Page
Email This page
